Self-priming long tube respirator
When wearing, firstly, place the long tube inlet end in a clean atmosphere, and the other end is connected to the mask inlet (tightly) 0.6m away from the mask, and fix the hose on the belt so as not to hinder the free movement of the body. When wearing the mask, wear it from the chin, and then adjust the headband properly. The mask should be in close contact with the face to ensure no air leaks. Then Operators can enter the work area.EXECUTIVE STANDARD: GB6220-2009
1 Overview
The HAT-ZX type (self-priming type long tube air breathing apparatus) is a safety protection device that protects the human body by inhaling filtered atmospheric air by human lung force. Suitable for use in atmospheric environments with heavy smoke, oxygen and dust pollution.
The HAT-ZX self-priming long-tube air respirator is a protective device that the wearer uses the lungs to inhale clean air through the breathing hose to ensure safe breathing.
2 COMPONENT
The HAT-ZX self-priming long tube air respirator consists of a 10M long corrugated hose, a mask and an air intake filter.
3 INSTRUCTIONS FOE USE
4 MAINTENANCE
After using the mask, wipe off all parts of the sweat and dirt, especially the lens and the expiratory valve. The inhalation valve should be kept clean.
If used in a virus environment with infectious nature, the mask can be wiped, cleaned and disinfected with 1% peracetic acid disinfectant. If necessary, the mask can be soaked in the acetic acid disinfectant. After the mask is disinfected, wipe it with water and dry it. .
- Product model： Self-priming long tube respirator
Get quotes
whatsAPP：